You may then be prompted to restart your computer. To begin, insert the Client Configuration Disk into the floppy disk drive and access the Run dialog box from the Start menu. In a moment, you'll see the Browser Connection Setup wizard's introductory screen, which contains a few instructions that you should read over before you proceed. The most important instruction here is to make sure that the Connection Sharing computer is already connected to the Internet.
When you click the Next button, the Browser Connection Setup wizard will inform you that it will now check and change your browser's connection settings. To continue, simply click the Next button. You'll then see the final screen in the Browser Connection Setup wizard. You can then choose to immediately connect to the Internet through the Connection Sharing computer when you click Finish.
As soon as you do, the browser on your client computer will launch, connect to the Internet through the Connection Sharing computer and open the home page.
From this point on, you can simultaneously access the Internet from all the computers on your network. To do so, just connect the Connection Sharing computer to the Internet and then launch the browser on the client computer. Developers are in short supply.
Here are the skills and programming languages employers need. McDonald's quietly revealed its stunning future -- and some customers will like it. The painful shame of owning an Android phone. Time for a Linux smartphone? If you use Google Chrome, you need to install this now.
AWS launches new EC2 instance type for high performance computing tasks. Developers, DevOps, or cybersecurity? However, he does read them all. Until now, this was an option only for the wealthy.
In the past, getting simultaneous Internet access from multiple PCs required either an expensive proxy server, or multiple phone lines and multiple accounts from your Internet service provider ISP. However, Windows 98 Second Edition includes a tool that allows you to connect multiple PCs to the Internet without the extra expense. Before you begin Before you begin, there are a few things you have to do to prepare your computers.
First, all your computers must be connected to a network. The network provides the cabling and the infrastructure that makes Internet sharing possible. There are several ways of accomplishing this task. Depending on the size and speed of the network you want, you can go to the computer store and buy a home networking kit, which is designed to handle two to four PCs sitting close together, or you could design your own custom network.
Designing a custom network is a lot more work and expense, but is very entertaining—and often more rewarding in the long run. This will save you time later. Finally, select the PC you plan to use to connect to the Internet. The Internet sharing components were originally designed to work with a dial-up connection. However, there are unconfirmed rumors circulating on the Internet that these components will also work with other types of connections, such as cable modems or DSL modems.
Your computer takes over the IP address assigned to it until you hang up, at which time your ISP relinquishes control of the address. As a matter of fact, the Windows 98 module that makes the connection possible is called the Dial-Up Networking Adapter. The process of sharing an Internet connection really involves nothing more than tying two networks together. The first network is the temporary dial-up network between your computer and your ISP.
The second network is the network within your house. When computers on the network are turned on, the DHCP server assigns them an IP address to use for a limited amount of time. Large blocks of IP addresses tend to be expensive and difficult to acquire. Therefore, in many networks, the IP addresses assigned by the local DHCP server are bogus and will work only on that network.
If allowed access to the outside world via the Internet , they would likely interfere with legitimate IP addresses used by other networks. Be aware that Windows 98 provides limited security features compared to later operating systems. Connect an Ethernet cable between your broadband router and the back of your computer.
You will need to have an Ethernet port in the back of the computer, and a card which is supported under Windows Turn on the router before continuing.
Right-click on "Internet Explorer" on your Windows 98 desktop and select "Properties. Choose the third option, allowing you to set up your connection manually.
0コメント