Cpqhealth driver

Here is my updated script.. FileSystemObject" Wscript. I am also going to report I fixed the above problem by uninstalling all the management agents and then uninstalling snmp and then installed snmp first and then the management agents. Worked like a charm.. How annoying is this. HP Systems Management Homepage 16 posts.

Sagan :]. All the G4s are loud. Not sure there's much you can do about it. Biff - They roar up and stay roared.. Posted: Sat Mar 03, pm. Last edited by mante80 ; 14 April , Thank you for your reply. Do you have an idea of what I can miss? My centreon machine is the vm provided on the site. I'm doing something wrong? Thanks for your help. Last edited by mante80 ; 17 April , Reason: I've removed extension.

Peux tu m'aider? Last edited by eddy ; 31 August , Any other suguestions? Newer G3, G4, some of the louder. Speed is "normal" on all 8 fans. I have another 4 or 5 servers in same rack. DL G4 is louder than all of them in sum.

If fan control would be passed to Health Driver I would knew, because I would hear speed changes, right? As a result of this enhancement, when the ProLiant DL G3 or G4 server is powered up, the system fans run at normal operating speed and there is no noticeable change in fan speed when the Health Driver loads and fan control is passed from the hardware to the Health Driver refer to the diagram below.

If the current value of this object is other 1 any attempt to set this object from a management station will fail.

Any attempt to set this object to other 1 by a management station will fail. This value will be one of the following: other 1 This feature is not supported by this system or driver. The system will automatically shutdown if the failed 4 condition results, so it is unlikely that this value will ever be returned by the agent. If the cpqHeThermalDegradedAction is set to shutdown 3 the system will be shutdown if the degraded 3 condition occurs. This value will be one of the following: other 1 Fan status detection is not supported by this system or driver.

If the cpqHeThermalDegradedAction is set to shutdown 3 the system will be shutdown if the failed 4 condition occurs. The system will be shutdown if the failed 4 condition occurs. Implies spin detect.

This value will be set if the fan type is tachOutput. A value of zero will be used if there is no redundant partner. Only the Ambient zone type allows setting of the threshold temperature. This value will be one of the following: other 1 Temperature could not be determined.

A string of length zero 0 will be returned if no description is available. Setting this variable with a zero length octet string will clear this variable. All other set operations will fail. This group also contains -- current operating utilization information such as the current EISA bus -- utilization. A value of -1 indicates that this feature is not supported on this machine or is not available.

If this value is -1, the utilization reported is for the aggregate of all devices on this PCI bus. A value of -1 indicates that the utilization number is not available. This value will be one of the following: other 1 The status could not be determined or not present. This value will be one of the following: other 1 The redundancy state could not be determined. A value of notavailable will be returned if this system does not contain IRC. A caution or critical entry can have it's severity lowered by setting this variable to the repaired state.

The meaning of this changes depending on the class. This represents the number of times this event has occurred starting from the initial time until the last modified time.